22L bucket lid designed to accept the Honey Filter Bag 600mµ
Cappings Bag for 2F, 3F & 4F Extractors Nylon Capping Bag for 3 & 4 Frame Extractors, 24 x 35mm, for centrifugal extraction of honey contained in cappings. Designed to be left hanging like a frame (full of cappings) in the honey extractor cage. Most cost-effective way to drain cappings.
Nytrel Honey Honey Filter 34cm diam ca 400mµ for placement on top of 15 - 25L buckets [bucket not included]
High capacity ca 600 micron Nytrel Honey Filter Bag suspended in 22L bucket, discharging into a second bucket of your choice.
Takes out most solids suspended in honey, while enabling wax recovery.
This simple but very effective system makes filtering/straining honey so much easier.
Honey Filter Bag ca 600mµ + 22L Buckets (2) Combo complete
High capacity ca 600 micron Nytrel Honey Filter Bag suspended in 22L bucket, discharging into a second 22L bucket with a Polygenic Honey Gate.
Takes out most solids suspended in honey, while enabling wax recovery.
This is simple but very effective Combo makes filtering/straining honey so much easier.
- High throughput Nytrel Honey Filter Bag - the best seller.
- Mesh size of 600mµ ensures efficient honey straining, removing all but the very finest wax and pollen particles.
- Designed for use with standard 20 - 22L buckets.
- Bucket and specially cut lid not included however Beewise can supply them so you are ready to go.
Honey Strainer Bag 600mµ
General purpose 600 micron Nytrel Honey Strainer Bag measuring 50cm x 38cm.
Very handy double stainless steel strainer for honey and wax cappings.
The 24cm x 34cm oval double filter comes with extendable stainless steel arms
Being a double filter it removes coarse fractions in the top screen followed by finer particles in the second screen, which improves the overall filtration efficiency and rate
Honey Strainer 24cm – double mesh Stainless-Steel. Made of durable Stainless-Steel 24cm diameter 2-level honey strainer has a coarse mesh to remove large pieces of wax and fine mesh to remove any leftover wax prior to settling then bottling. It features extendable supports so it fits a range of buckets.
Heavy Duty 84L dual purpose Tub with honey gate, stainless steel strainer insert, cover and cover latches
Perfect for drainage of uncapped honey frames and storage of sticky honey frames.
Made in the UK, this heavy duty polyethylene tub is certified Food Grade.
AVAILABILITY
1800 BEEWISE / 1800 233 947
These highly efficient filters are like a giant coffee filter but made of temperature resistant material and ideal for filtering hot wax. They measure 28cm x 28cm x 40cm across the open top of the filter.
Packed in lots of 10.
Straight out of the extractor, honey carries flecks of wax, cappings and broken comb, and a honey strainer is how you get it clean before it reaches the jar. Beewise supplies honey strainers and filters for hobbyists running one bucket at a time through to sideliners processing a full season's harvest, from double-screen stainless steel strainers with extendable arms to Nytrel honey filter bags made for standard 20–22L buckets.
The simplest approach is to strain in stages. A stainless steel honey strainer has a coarse top screen that catches the larger pieces of wax, so the fine lower screen doesn't clog as quickly. A 600 micron honey filter bag then removes all but the very finest wax and pollen particles, and our combos pair it with a second bucket fitted with an Australian honey gate so strained honey runs straight out for bottling. For a finer mesh again, the flat 400 micron honey sieve sits across a 15–25L bucket.
You'll also find cappings bags for spinning honey out of cappings in 2, 3 and 4 frame extractors, plus heat-resistant filters for hot wax. Pair your honey strainer with the right honey extractor, spare honey gates for your buckets and a wax melter for the leftover cappings. Our Perth and Sydney team can help match a filter to your bucket.