Frame Accessories

Per page
Per page
SKU: F0704
Brass Frame Eyelets (Packs 100)

Brass Eyelets are used in the small holes in wood frame end bars to prevent reinforcing wire from gouging the wood, resulting in slack frame wire.

Check Quantity Price Breaks

$6.00 As low as $2.70
View More
SKU: H2169
Frame Groove Cleaner

After removing old wax foundation, clean the frame gooves with this very effective tool in readiness for the insertion of new wax or plastic foundation.

$11.00
SKU: H2235
Frame Groove Cleaner HD SS

Heavy Duty in Stainless Steel.

After removing old foundation, clean the frame gooves with this very effective tool in readiness for the insertion of new wax or plastic foundation.

$12.50
SKU: F0700
Frame Wire 500g 0.5mm annealed 304 Stainless-Steel

Frame Wire – annealed 0.5mm 304 Stainless-Steel.

  • Remember, honey is acidic and corrodes tinned and galvanised steel frame wire.
  • Grade 202 SS is not much better than plain steel so its short lived and subject to corrosion.
  • Corrosion products will contaminate your honey.
  • Play safe - use 304SS wire
$27.25
SKU: F0703
Frame Wire 500g 0.5mm Galvanised Steel

Galvanises Steel frame wire 500g.
Diameter 0.5mm and approximately sufficient for about 180 - 200 full depth frames

$10.25
SKU: H2121
Frame Wire Crimper
Re-tension your old steel frame wires with this crimping device. Hold the installed wire between the two wheels, grip tight, then move along the wire, it will crimp the wire and tighten in one movement. Foundation will still embed perfectly onto the crimped wires. If the steel wire is rusted best install new 304SS wire, in which case you won't need a Frame Wire Crimper!
$5.50
SOLD OUT
PLEASE CALL TO CHECK AVAILABILITY
1800 BEEWISE OR 1800 233 947
SKU: H2139
Frame Wire Crimper - HD SS

Frame Wire Crimper - HD SS.

No straining of the wire or sore hands! This is an essential for any Beekeeper who prefers wiring their own frames, it makes the process easier, quicker and less painful!

$21.00
SKU: H2117
Wax Foundation Embedder Transformer AC240V-DC13.8V, Heavy Duty 20Amp - Short Circuit Protected

Unlike battery chargers, this transformer is designed to supply high current loads reliably all-day. Beewise has thrashed their transformer day long for about 3 years – works perfectly with Wax Embedder SKU 2102 and Wax Embedding Board SKU H2113.

Features

  • Up to 20A output
  • Fixed 13.8V voltage
  • High efficiency switchmode design
  • Low noise and ripple <100mV
  • 2% voltage regulation
  • Short circuit protected output
  • Fused input
  • Measures 25 x 21 x 12cm
  • Rugged industrial grade product
  • Buy well - buy once
$279.00
SKU: H2122
Wax Foundation Embedder- Brass
Wax Foundation Embedder used to affix frame wire to foundation.
$11.00
SKU: H2102
Wax Foundation Embedding Arm DC 6/12 V

Wax Embedder with 4 prongs to ensure frame wire is evenly embedded in the wax foundation.
Works a treat with Beewise DC 6/12V Wax Embedding Transormer SKU H2117 and Embedding Board SKU H2123 

USE 12 VOLT DIRECT CURRENT POWER SUPPLY ONLY. 
DO NOT USE 230/240 VOLT.

$74.00
SKU: H2123
Wax Foundation Embedding Board FD
Full Depth Wax Embedder Board supports wax foundation in wire embedding process.
$9.90
SKU: H2178
Wax Foundation Embedding Board Ideal

Ideal Wax Embedder Board supports wax foundation in wire embedding process.
Works in conjunction with Electric Wax Embedder

$9.90
SKU: H2177
Wax Foundation Embedding Board Manley

WSP Wax Embedder Board supports wax foundation in wire embedding process.
Works in conjunction with Electric Wax Embedder

$9.90
SKU: H2124
Wax Foundation Embedding Board WSP
WSP Wax Embedder Board supports wax foundation in wire embedding process.
$9.90
SKU: H2197
Ziplock Resealable Bag - safe storage of wax foundation & waxed frames - Heavy Duty 180µm

These large zip lock freezer bags will hold 3 full depth frames for storage over winter, an ideal way to keep wax moth off your frames during winter. 
Perfect for safe storage of wax foundation.

- Heavy duty 360µm, super tough, resilient and hard to puncture; cf a standard bin liner of 30 µm
- Food safe Polyethylene | BPA Free | SGS Certified
- Moisture and air proof with zip lock

Bag measures 40.5 cm x 60 cm

$6.75
Per page
Per page